Table of Contents
Advertisement
Recording (VCR)
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
1
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
2
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and "SP" or "SLP"
will appear on the screen for about 4
seconds.
SP/SLP
PLAY MODE
3
Set "TV" or "CABLE" option to the
appropriate position
36
J2D81701A (E)p32-37.p65
00 : 00 : 00 SP
.
27
TV
- VHF/UHF channels
CABLE - Cable TV channels
36
4
Press Number button or CH +/– to select the
channel to be recorded.
SET +
1
2
3
CH –
CH +
4
5
6
ENTER
SET –
7
8
9
0
5
Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, "
the display.
Press
Recording time Press
once
6 times
NORMAL REC
twice
0:30
7 times
3 times
1:00
8 times
4 times
1:30
9 times
5 times
2:00
10 times
REC/OTR
To cancel OTR
Press STOP or turn off the power.
STOP
"
" will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press VCR DVD selector to change to DVD mode and
perform the DVD playback
42
8/18/04, 3:34 PM
VCR DVD
4
2
5
STOP
4
CH 110
" will appear on
Recording time
3:00
4:00
5:00
6:00
NORMAL REC
OTR 0 : 30
CH 110
INDEX
.
Advertisement
Table of Contents
