One-Touch Timer Recording (Otr); Timer Recording; Stereo Recording And Playback; Other Functions (Vcr) - Toshiba SD-V280UA Service Manual

Recording (VCR)

One-touch Timer Recording (OTR)

The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
1 Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
2 Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
00 : 00 : 00 SP
3 Set "TV" or "CATV" option to the appropriate
position .
27
TV - VHF/UHF channels
CATV - CABLE TV channels
36
Recording (VCR)
Timer recording (continued)
Setting procedure
To set daily/weekly timer
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-
SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the
DATE indicator will change as follows, in
this case the day is Friday.
The current day (Friday) SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
minus one day
MO-FR (Monday to Friday)
WKL-WE WKL-TH (Weekly Thursday)
(Weekly Wednesday)
DATE START END CH
WKL-WE
〈+/—/ENTER/CANCEL/MENU〉
If the programs overlap another
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00 9 : 00 10 : 00 11 : 00
Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Prog.1 Prog.2 Prog.3
Control Settings
Notes:
• The daily/weekly recording can be made continuously until the
recording is canceled or the tape reaches the end.
• During timer recording the automatic rewinding mechanism
does not function.
38
DVD/VCR
4
4
5
2
STOP
4 Press Number button or CH / to select the
channel to be recorded.
CH 110
5
Press OTR. Recording begins. Press the button
again to stop recording after 30 minutes. Each
additional press of OTR will increase recording
time as shown in the chart below, up to a
maximum of 5 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, " " will appear on
the display.
Press Recording time Press Recording time
once NORMAL REC 6 times 3:00
0:30 4:00
twice 7 times
3 times 1:00 8 times 5:00
4 times 1:30 9 times NORMAL REC
5 times 2:00
OTR 0 : 30
CH 125
INDEX
To cancel OTR
Press STOP or turn off the power.
" " will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press DVD/VCR to change to DVD mode and perform
the DVD playback .
43
DVD/VCR
SET +/–
ENTER
CANCEL
VCR MENU
TIMER REC
To confirm or cancel a program
1 If the Timer has been activated, press TIMER
REC to deactivate the Timer.
The timer symbol ( ) will
disappear. Then press DVD/VCR to
change to VCR mode.
2 To confirm Timer program:
At picture 1 on the previous page select "TIMER
REC SET" and press ENTER.
The timer program list will appear on the screen.
DATE START END CH
26(SU) 11:00 PM 11:30 PM 125 SLP
〈+/—/ENTER/CANCEL/MENU〉
3 To cancel Timer program:
Press SET + or – to select the unwanted program,
then press CANCEL to cancel the program.
DATE START END CH
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
〈+/-/ENTER/CANCEL/MENU〉
4 Press VCR MENU repeatedly until the menu
screen is cleared.
Notes:
• If there are other timer record programs remaining, TIMER
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer recording
operation.
• You can correct or cancel a programmed setting in program
confirm mode.

Timer recording

Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Preparation:
5
• Press DVD/VCR to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct .
24
Example: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1
Press VCR MENU. Select "TIMER REC SET",
then press ENTER.
MENU
TIMER REC SET
6
AUTO REPEAT ON OFF
SAP ON OFF
CH SET UP
SYSTEM SET UP
+/-/ENTER/MENU
á ñ
2
Press SET + or – to select one of the program
line, then press ENTER.
DATE START END CH
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — — Notes:
— — — — — — — : — — — : — — — — — —
• The timer recording will start at 5 seconds before the time
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
• If the timer symbol(
— — — — — — — : — — — : — — — — — —
〈+/-/ENTER/CANCEL/MENU〉
• If the cassette is ejected in spite of the pressing of TIMER
3 Press SET + or – to select the date, then press
ENTER.
DATE START END CH
26(SU) — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — —
Notes:
— — — — — — — : — — — : — — — — — —
— — — — — — — : — — — : — — — — — — • If the timer symbol (
— — — — — — — : — — — : — — — — — —
the TV program has not been completely recorded because of
— — — — — — — : — — — : — — — — — —
〈+/-/ENTER/CANCEL/MENU〉
an insufficient tape length. Press TIMER REC to cancel the
timer program or press TAPE EJECT to remove the cassette
tape.
4
Set the start time, end time, channel and tape
• During timer recording standby mode, the VCR mode cannot be
speed as in step 3.
operated. To use the VCR, press TIMER REC at first, then press
DVD/VCR to change to VCR mode. After you use the VCR,
DATE START END CH
press TIMER REC again to put the VCR into timer recording
26(SU) 11:00 11:30 125
PM PM SLP
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
standby mode.
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð • If you press TIMER REC during timer recording, the recording
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
operation will be interrupted. If you press TIMER REC again
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
within the programmed time, the recording operation will start
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
á +/-/ENTER/CANCEL/MENU ñ again.
Notes:
• After a power failure or disconnection of the power plug, all
• Press CANCEL to move cursor backward for correction.
programmed recording settings and time display will be lost
• To record from external source set the channel to "L1" or
upon resumption of power. In this case, reset the clock
"L2". "L1" or "L2" will appear next to CH 125 (or 69).
reprogram any timer recording.

Other functions (VCR)

Stereo recording and playback /

Separate Audio Program (SAP)

Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity record-
Your DVD/VCR is fitted with a SAP broadcast system which
ing of MTS STEREO TV broadcasts. enables you to switch to a separate audio program when
viewing a selected channel.
When a MTS STEREO broad-
This function applies only when the program is broadcast in
cast is received, "STEREO" will
multi-languages through the SAP broadcast system.
appear on the screen and the
STEREO
program can be viewed or re-
1
corded in stereo.
The Hi-Fi stereo recording pro-
cedure is the same as for normal
recordings.
Note:
When using a CATV system, stereo TV programs may be
transmitted over a mono cable channel. In this case
"STEREO" will not appear and the sound will be in mono.
2
Output selection
When viewing an MTS stereo TV program, or playing a
prerecorded VHS Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The "R"
and "L" positions allow the audio from the Right or Left Hi-
Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape or
TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for
Listening to SAP
several seconds. Refer to the chart below.
When the VCR is turned on or a channel selection is
made, make certain the letters "SAP" appears on the
OUTPUT SOUND HEARD ON BOTH
screen. This means that the "Separate Audio Program"
SELECTION SPEAKERS
broadcasting is available.
STEREO STEREO
L CH LEFT CHANNEL AUDIO
R CH RIGHT CHANNEL AUDIO
MONO MONO
Notes:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cord not connected),
the sound will be monaural.
DVD/VCR
TAPE EJECT
2, 3
1-3
CANCEL
1, 5
TIMER REC
To enter other programs, repeat step 2
through 4.
• To return to the normal screen,
press VCR MENU twice.
DATE START END CH
26(SU) 11:00 PM 11:30 PM 125 SLP
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
Ð Ð Ð Ð Ð Ð Ð : Ð Ð Ð : Ð Ð Ð Ð Ð Ð
á +/-/ENTER/CANCEL/MENU ñ
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the Timer recording mode.
If you do not use the DVD, turn the
power off.
you predetermined.
) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded.
29
REC, the erase prevention tab of the cassette may have
been removed. 29
) blinks when the timer recording ended,
and
24
37
DVD/VCR
TRACKING
ENTER
CANCEL
TIMER REC
AUDIO SELECT
Separate Audio Program (SAP)
Press VCR MENU. Then press SET + or – to
select "SAP".
Press ENTER to select "ON".
Then press VCR MENU until the
menu screen is cleared.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SET UP
SYSTEM SET UP
〈+/—/ENTER/MENU〉
STEREO SAP SAP
OR
39