One Touch Timer Recording(Otr) - Toshiba SD-K530SU Service Manual

Operation with tape (Continued)
Checking (Erasing) the Timer Program
Programming can be checked whenever the DVD+VCR
is turned on.
1 Press VCR MENU and the MAIN menu will appear.
2 Use v/V to choose the PROGRAM menu.
Press ENTER and the PROGRAM menu will appear.
3 Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
4 Press VCR MENU to return to the TV screen.
Program Priority
The first part of program number 2 will not be recorded.
The same thing will happen to program number 3.

One touch Timer Recording(OTR)

One touch Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
Preparation:
Turn on the power of both the DVD+VCR and the TV.
Be sure the TV is tuned to the DVD+VCR output channel (3
or 4).
If a direct VIDEO/AUDIO connection is made between the
DVD+VCR and the TV, set the TV's source selector to
VIDEO.
1 1
Insert a video cassette with the safety tab intact.
2 2
Select the desired channel by using CH/TRK
(+/-) or number (0-9).
The channel number appears on the TV screen.
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select the
LINE1 or LINE2.
If the recording start and end
times of preset programs
overlap on the same day
(see the example and dia-
gram left), program number
2 will not be recorded until
program number 1 is fin-
ished.
3 3
Set the desired recording speed (SP or SLP) by
pressing SP/SLP.
The tape speed will appear on the TV screen.
4 4
Press REC/OTR twice.
The menu as illustrated, will appear on the TV screen.
Recording will start. (The TIMER indicator will light)
5 5
Press REC/OTR repeatedly to select the
recording time length.
At the end of the recording, the DVD+VCR will stop
recording and shut off.
During One touch Timer Recording, changing the chan-
nel on the DVD+VCR will not be possible.
You can stop the recording by pressing STOP.
ONE TOUCH TIMER RECORD MENU
ONE TOUCH TIMER RECORD
CHANNEL 2
SPEED SP
START NOW
LENGTH 0H30M
Checking the Recording Time
Press REC/OTR once to check the recording time. The
recalled setting will automatically return to the TV
screen after 6 seconds.
To extend the Recording Time
The recording time can be extended anytime by press-
ing REC/OTR.
Subsequent presses result in advancing the recording
time by 30-minute increments to a maximum fo 9 hours.
Notes
If you press PAUSE/STEP during One touch timer recording,
the DVD+VCR will enter the recording pause mode. Instant
timer recording is cancelled.
If the DVD+VCR is set to "0H00M", the DVD+VCR goes to
normal recording mode.
1-28
› › › ›
0H30M ..... 9H00M 0H00M
Length Display
(each additional press of
REC/OTR increases
recording time 30 minutes)