Table of Contents
Advertisement
Connections
Connecting to optional equipment
You can enjoy high quality dynamic sounds of DVD video discs or
audio CDs by connecting the DVD/VCR to optional audio
equipment.
For connection to your TV, see "Connecting to a TV"
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home. You can enjoy motion
picture and live concert DVD video discs with this dynamic realistic sound by connecting the
DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital
processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of
Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.
Amplifier equipped with a
To COAXIAL
type digital
audio input
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set
the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and
Audio CDs.
*
Amplifier equipped with
Dolby Surround Pro Logic
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use,
on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full
benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
Amplifier equipped with a
To COAXIAL
type digital
audio input
20
J2E50601A (E)p18-25.p65
Dolby Digital decoder
To OPTICAL type
digital audio input
Optical digital cable
75 Ω coaxial cable
To audio input
Audio cable
DTS decoder
To OPTICAL type
digital audio input
Optical digital cable
75 Ω coaxial cable
20
• This selection uses the following reference mark.
: Front speaker
.
18 19
: Rear speaker
: Sub woofer
Manufactured under license from
Dolby Laboratories. "Dolby" "Pro
Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
Connect either.
To ANALOG
AUDIO OUT
"DTS" and "DTS Digital Out" are
trademarks of Digital Theater Systems,
Inc.
Connect either.
8/30/04, 5:51 PM
: Center speaker
: Signal flow
• Use DVD video discs
encoded via the Dolby Digital
recording system.
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
• Use DVD video discs or audio
CDs encoded via the DTS
recording system.
Advertisement
Table of Contents
