Zooming/Locating Desired Scene - Toshiba SD-37VSR User Manual

Zooming (DVD/VCD)
This unit will allow you to zoom in on the frame image.
You can then make selections by switching the position
of the frame.
1 Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change
the ZOOM
and
2
Press C C C C C /D D D D D /B B B B B /A A A A A to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3 In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view (
Notes:
• You can select the Pause, Slow or Search playback
in the zoom mode.
• Some discs may not respond to zoom feature.

Zooming/Locating desired scene

1 (x 1.3), 2 (x 1.5)
3 (x 2.0).
1
Off).
Locating desired scene
(DVD/VCD/CD)
Use the title, chapter and time recorded on the DVD
disc to locate the desired point to playback. In the case
of VCD/CD discs, time and track are used to locate the
desired point to playback. To check the title, chapter
and time, press DISPLAY.
1
Press JUMP during playback or resume stop
mode.
Press C C C C C or D D D D D to select the "Title/Track",
2
"Chapter" or "Time".
Press Number buttons (0–9) to input the
3
number.
• If you input a wrong number,
press CLEAR.
• Refer to the package supplied
with the disc to check the
numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Notes:
• In case of the Audio CD and Video-CD, only Track
and Time can be selected.
• In case of the Video-CD playback with PBC, the
JUMP does not work. Turn off the PBC (see page 47).
Jump
Title
Chapter
Time
Jump
Title
Chapter
Time
Jump
Title
Chapter 12
Time
41