Playing A Disc; Zooming/Location Desired Scene - Toshiba SD-25VLSR Service Manual

Playing a disc

This section shows you the basics on how to play a disc.
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and
select the corresponding video input connected to the
DVD/VCR. This may include video or component video
inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the
input connected to the DVD/VCR.
1 Press ON/STANDBY (I / ), then press DVD to
select the DVD mode.
The DVD/VCR turns on and the DVD
indicator lights.
"Reading" display will change to
"No Disc".
(If DVD disc has already loaded,
playback will start automatically.)
No Disc
2 Press OPEN/CLOSE.
The disc tray opens.
3
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD to malfunction.
• Do not place a disc which is unplayable in this
DVD.
40
Playing a disc
You can play discs at various speeds.
Playing in fast reverse or fast forward directions
Press REW or FWD during playback.
REW: Fast reverse playback
FWD FWD: Fast forward playback
REW
Each time you press the REW or
FWD button, the playback speed
changes.
Playing frame by frame
Press PAUSE/STILL during still playback.
Each time you press the PAUSE/
STILL button, the picture advances
one frame.
Playing in slow-motion
Press SLOW during playback.
Each time you press the button, the
slow-motion speed changes.
Locating a chapter or track
Press SKIP or repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
One touch repeat
Press ONE TOUCH REPEAT during playback.
The playback skips back about 10 seconds and starts
playing again.
If you press ONE TOUCH REPEAT again after the
skipping back, it skips back a further 10 seconds.
Notes:
• A "Prohibition" symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD can not access the feature at this time. This does not indicate a problem with the DVD.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
42
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
4
Press OPEN/CLOSE or PLAY on the unit.
The disc tray closes automatically.
On the TV-screen, " " changes to
"Reading" and then playback
OR
commences.
PLAY
Reading
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press C/D or B/A to select title, then press
ENTER. Title is selected and play commences.
5 Press STOP to end playback.
Resuming facility
• The unit records the stopped point,
depending on the disc. " "
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or unload
the disc (" " appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
PLAY
To resume normal playback
Press PLAY.
PLAY
Notes:
• The DVD/VCR mutes sound and subtitles during reverse
and forward scan of DVD/VCD video discs. However, this
unit plays sound during fast forward or fast reverse play of
audio CDs.
• The playback speed may differ depending on the disc.
To resume normal playback
Press PLAY.
PLAY
Note:
The sound is muted during frame by frame playback.
To resume normal playback
Press PLAY.
PLAY
Note:
The sound is muted during slow-motion playback.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
Notes:
• Some discs may not work with the one touch repeat
function.
• Some functions may be unavailable due to the disc
configuration.
• Depending on the playback status, one touch repeat may
not skip back as intended.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen
while playing a DVD video disc because the high resolution pictures on these discs include a lot of
information. While the amount of noise depends on the TV you use with this unit, you should generally reduce
the sharpness adjustment on your TV when viewing DVD video discs.
To pause playback (still mode)
Press PAUSE/STILL during playback.
To resume normal playback,
press PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the
TV screen according to the type of loaded disc. In this case, check your disc again (see pages 39 and 58).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press OPEN/CLOSE or PLAY
on the unit, "Reading" will appear on the display for 30 seconds and then "Incorrect Disc" will continue to be
displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see
page 50.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the
unit to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an
on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid
this, be sure to press ON/STANDBY (I / ) on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
Zooming/Locating desired scene
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1 Press ZOOM during playback.
The centre part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM as follows.
1 2 3
DVD
(x 1.3) (x 1.5) (x 2.0)
1 2 3
Video CD/
(x 1.3) (x 1.5) (x 2.0)
JPEG CD
1
Note:
In case of the Video CD recorded with
PAL colour system, 3 (x 2.0)
zooming does not work.
2
Press / / / to view a different part of
the frame.
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
3 In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
Playing a disc
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press OPEN/CLOSE to close the disc
tray after you remove the disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
Locating desired scene
Use the title, chapter and time recorded on the disc to locate
the desired point to play back.
To check the title, chapter and time, press DISPLAY.
1
Press JUMP during playback or stop mode.
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
2
Press or to select the "Time", "Title" or
"Chapter".
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Press Number buttons (0–9) to change the
3
number.
Jump Time
Title
Chapter 12
/Enter/0 9/Cancel/Jump
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video CD playback with PBC, the Search (Jump)
function does not work. To turn off PBC, see page 50.
41
43