Samsung ProXpress SL-M3320ND/XAA User Manual page 97

Understanding display messages
9
Imaging unit-related messages
Message Meaning
Not Installed An imaging unit is not
installed.
Imaging unit
An imaging unit is not
being detected
Not remove protective
film from toner.
Not compatible The imaging unit is not
suitable for your
Imaging unit
machine.
Prepare new Small amount of toner
Image unit is left in the imaging
unit. The estimated
cartridge life of toner is
close.
Suggested solutions
Reinstall the imaging unit.
Reinstall the imaging unit two or three
times to confirm it is seated properly. If
the problem persists, contact the
service representatives.
Remove the protective film from the
imaging unit.
Install the corresponding cartridge
with a Samsung-genuine cartridge
(see "Replacing the imaging unit" on
page 65).
Prepare a new imaging unit for a
replacement.
Message Meaning
Replace new An imaging unit has
reached its estimated
Image unit
cartridge life.
Samsung does not recommend using a non-genuine Samsung cartridge
such as refilled or remanufactured. Samsung cannot guarantee a non-
genuine Samsung cartridge's quality. Service or repair required as a result of
using non-genuine Samsung cartridges will not be covered under the
machine warranty.
Suggested solutions
• You can choose Stop or Continue
as shown on the control panel. If
you select Stop, the printer stops
printing. If you select Continue, the
printer keeps printing but the
printing quality cannot be
guaranteed.
• Replace the imaging unit for the
best print quality when this
message appears. Using a cartridge
beyond this stage can result in
printing quality issues (see
"Replacing the imaging unit" on
page 65).
• If the machine stops printing,
replace the imaging unit (see
"Replacing the imaging unit" on
page 65).
4. Troubleshooting
97