Samsung ProXpress SL-M3320ND/XAA User Manual page 163

Wireless network setup
Disconnect the network cable (standard or network). Your machine should
then start communicating wirelessly with the network. In case of Ad-hoc
mode, you can use a wireless LAN and wired LAN simultaneously.
10 Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
19
Turning the Wi-Fi network on/off
If your machine has a display, you can also turn on/off the Wi-Fi from the
machine's control panel using the Network menu.
1 Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
2
your machine's new IP address in the browser window.
For example,
Click Login on the upper right of the SyncThru™ Web Service website.
3
4 Type in the ID and Password, then click Login. We recommend you to
change the default password for security reasons.
• ID: admin
• Password: sec00000
5 When the SyncThru™ Web Service window opens, click Network
Settings.
6 Click Wireless > Custom.
You can also turn the Wi-Fi network on/off.
20
Setting the Wi-Fi Direct for mobile printing
Wi-Fi Direct is an easy-to-setup peer-to-peer connection method between the
Wi-Fi Direct certified printer and a mobile device that provides a secure
connection and better throughput than ad hoc mode.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while
concurrently connecting to an access point. You can also use a wired network
and a Wi-Fi Direct network simultaneously so multiple users can access and print
documents both from Wi-Fi Direct and from a wired network.
2. Using a Network-Connected Machine
163