Maintenance Check Screen; Engine Warning Screen - Honda BF40 Owner's Manual

● Quad screen layout
Displays information about the single engine, or multiple
engines simultaneously by dividing the screen into four.
In the single screen layout, triple screen layout, and quad
screen layout, the number of divisions of the screen differs.
You can change the layout, the number of pages, and the
display contents of the screen. (P.27)
(1) Number of the engine currently selected
(2) Engine speed (analog display and digital display)
(3) You can select the following options. (digital display)
Engine speed
Trim angle
Engine boost pressure
Engine temperature
Battery voltage
Fuel level
Instantaneous fuel consumption
Fuel efficiency
Total fuel consumption
Cruising time
Cruising distance
Total operation time
Speed over ground
Speed over water

Maintenance check screen

Displays the status of a maintenance notification to each
engine and the time until the next maintenance notification is
made.
(1)
(1)
(2)
(3)
(1) Engine number
Number set in each engine.
(2) Maintenance icon
Status of a maintenance notification to each engine.
When the remaining time before maintenance reaches 0
hours, an icon notifying of periodic inspection appears.
(3) Remaining time before maintenance display
Time until a maintenance notification to each engine is
made.
• When a periodic inspection time signal is received from the
outboard motor, the following pop-up window appears.
You can close the pop-up window by pressing any button in
the Multi-Function Display.
* Display of the maintenance time pop-up notification can be set
to ON or OFF. (P.41)

Engine warning screen

Displays the contents of warnings that are currently being
issued. If there are no warnings to display, the No Engine
Warning message appears.
5
(2) (3)