Anchor Types; Anchor Specifications; Pullout Force - Life Fitness S180-AFS Owner's Manual

Anchor Types

Anchor
HSL HST
• HS Anchors listed are Metric Hilti™ Concrete Anchors
• Minimum concrete compressive strength: 3000psi (20 N/mm2)
• Minimum concrete thickness:
• HSL-3 and HSL4 M 8: 4-3/4" (120mm)
• HST M12 : 5-1/2" (140mm)
• Minimum distance from anchor to concrete edge or seam:
• HSL-3 and HSL4 M 8: 2-3/8" (60mm)
• HST M12: 4-3/4" (120mm)
• Minimum hole depth in concrete:
• HSL-3 and HSL4 M 8: 3-1/64" (80mm)
• HST M12 Safety Stud Anchor (EMEA): 3.7" (95mm)
• Minimum concrete embedment:
• HSL-3 and HSL4 M 8: 2-13/32" (60mm)
• HST M12 Safety Stud Anchor (EMEA): 2.8" (70mm)

Anchor Specifications

Static Anchor
HSL-3 and HSL4
M8/40
HST M 12

Pullout Force

Life Fitness specifies Hilti
design pullout force (in tension) for the specified anchors, when properly installed in cracked concrete, is provided in
the side table. This table should be used for reference only; for additional and up-to-date information on the anchor
capabilities or the design pullout force in other substrates, please consult Hilti directly at https://www.us.hilti.com.
Subfloor thickness between unit and concrete
0" - 3/4" (0mm - 19.1mm)
HSL-3 and HSL4 M 8/40
Minimum Concrete Minimum Drill Depth
Thickness
4-3/4" (120mm)
5-1/2" (140mm)
™ static and dynamic anchors. According to the anchor manufacturer, the recommended
3/4" - 1.0" (19.1mm -
25.4mm)
HST M12 x 115/20 to HST M12 x 295/200
(length depends on subfloor thickness)
Minimum Concrete
in Concrete
1/2" (12.7mm) 2-13/32" (60mm)
beyond anchor
length
25/64" (10mm)
beyond anchor
length
Page 39 of 43
1.0" - 7.0" (25.4mm -
178mm)
Minimum concrete
Embedment compressive strength
3000psi (20.7 N/
2.8" (70mm) 3000psi (20.7 N/
mm2)
mm2)