Table of Contents
Advertisement
Final Assembly
Follow these steps to complete assembly.
1. Tighten all hardware from previous steps:
Torque hardware to 18-20 ft-lbs (24.4-27.1 Nm) unless noted.
2. If using the Freestanding System (AFS), move to Step 4.
3. Anchor unit to floor:
Refer to
Bolt to Floor Guide
not need to be anchored directly to the floor.
4. Attach Foot Covers:
Install Foot Covers and hardware.
in this manual for further details. S180 units using the Freestanding System (AFS) do
Page 30 of 43
Item
Description
1
Floor Anchor
Item
Description
1
Left Foot Cover
2
Right Foot Cover
3
8 X 3/4" Screw
4
Grommet
NOTE: Left Foot Cover must be installed first.
Qty.
3
Qty.
1
1
6
6
Advertisement
Table of Contents
