Steps
1. Align the rib, inside the right display-hinge cap, to the left-outer side of the right display hinge.
2. Push the right display-hinge cap down on the right display hinge, until it clicks in place.
3. Align the rib, inside the left display-hinge cap, to the right-outer side of the left display hinge.
4. Push the left display-hinge cap down on the right display hinge, until it clicks in place.
Next steps
1. Install the
display
assembly.
2. Install the
wireless
card.
3. Install the
base
cover.
4. Follow the procedure in
86
Removing and installing Field Replaceable Units (FRUs)
After working inside your
computer.