D-Link DSL-224 Setup Manual

Hide thumbs Also See for DSL-224:

Download this manual

Step 1

: Open your Internet browser (ex. Internet Explorer, Mozilla, Google Chrome, Safari) and

type in the Routers IP address in the address bar and press enter. (Default IP 10.0.0.2).

Step 2

: Type in the User Account Credentials for the router. By default the Username is: admin and

the Password is: admin

Step 3

: Click on Internet setup, Channel Config. Select the WAN Physical type as "Ethernet WAN"

Note: once interface has been selected, unit will restart to load correct interface.

Setup Guide for the DSL-224

Page 1 Setup Guide for the DSL-224 Step 1 : Open your Internet browser (ex. Internet Explorer, Mozilla, Google Chrome, Safari) and type in the Routers IP address in the address bar and press enter. (Default IP 10.0.0.2). Step 2 : Type in the User Account Credentials for the router. By default the Username is: admin and...
Page 2 Setup Guide for the DSL-224 Step 4 to the WAN table. Select the : After the unit has loaded the correct interface, Scroll down circular tick box to edit the default account. Step 5: Scroll up to the Channel configuration and modify the default configuration with the username and password provided by your ISP ...
Page 3 Setup Guide for the DSL-224...