System Management - Dell OptiPlex 5090 Small Form Factor Service Manual

Table 23. Update Recovery (continued)
Options

System Management

This section provides System Management settings.
Table 24. System Management
Options
Service Tag
Service Tag
Asset Tag
Asset Tag
Wake on LAN
Wake on LAN
Auto On Time
Auto On Time
SERR Messages
First Power On Date
Description
● Off
● 1
● 2 (selected by default)
● 3
Description
This field provides the unique Service Tag of the computer.
This field provides the asset tag which is a unique and up
to 64-character identification that can be set by the IT
administrator.
This field allows the user to select if and how the system
should boot when connected to LAN. The options here are as
follows:
● Disabled - The system will not boot with any special LAN
signals (selected by default).
● LAN only - Allows the system to be powered on by a
special LAN signal from a network computer.
● WLAN only - Allows the system to power on by special
WLAN signals.
● LAN or WLAN - Allows the system to power on by special
LAN or wireless LAN signals.
● LAN with PXE Boot - Allows the system to wake-up from
S4 or S5 state and boot to PXE.
This field allows the user to set defined days/time when the
sytem can automatically power on. The options here are as
follows:
● Disabled (selected by default)
● Everyday
● Weekdays
● Select Days
This section allows the user to enable or disable(ON/OFF) the
SERR message mechanism (ON by default).
NOTE: Some graphics cards require SERR message
mechanism to be disbaled.
This option if enabled lets the user see the ownership date
(disabled by default).
System setup 81