Coin-Cell Battery; Removing The Coin-Cell Battery - Dell OptiPlex 5090 Small Form Factor Service Manual

Steps
1. Align the graphics card with the PCIe x16 card slot on the system board.
2. Using the alignment post, connect the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Close the expansion-card door, and press until it clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Coin-cell battery

Removing the coin-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 41