DeLonghi EC9155.YE Instructions For Use Manual page 6

LIGHTS
Flashing
Flashing - On
Flashing
3. MENÙ SETTINGS
Enter the setting
menu
Press both buttons (B5)
and (B7) for 3 seconds to
enter setting menu
Select the setting
Turn the knob (B8)
to select the position
corresponding to the
function to set
Press the temperature button:
Press the temperature button again to change the setting:
Pre-infusion
delay
➡ No
➡ 1 sec
➡ 2 sec
EXPLANATION OF LIGHTS
Descaling proceeds. The machine deliv-
ers descaling solution
The first phase of the descaling cycle
is complete. You now need to proceed
with rinsing.
The machine proceeds with the rinsing
phase to complete the descaling cycle.
+
the light corresponding to the corrent setting flashes.
Extra grinding
adjustment
range
st
➡ 1
➡ 2 range
nd
OPERATION
Proceed by completing the descaling cycle
(see "9. Descaling")
Press OK to start rinsing.
Proceed by completing the descaling cycle
(see "12. Descaling")
Reset to default
values
Keep pressed steam but-
ton (B9) for 3 seconds
Auto off
➡ 9 minutes
➡ 1,5 hours
➡ 3 hours
6
Water hardness
➡ soft
➡ medium
➡ hard
...
→