PROBLEM
If you want to change the type of coffee You must remove all the beans present
After grinding, the coffee filter is empty The coffee grinder funnel is clogged
After grinding, the ground coffee in the
filter (C3) or (C4) does not reach the
"perfect dose"
CAUSE
in the machine
The quantity of ground coffee needs
adjusting
You are using the 2 cup filter (C4)
Over time the burrs wear down
13
SOLUTION
•
Empty the beans container (A3) (if nec-
essary, operate the coffee mill without
beans or use a vacuum cleaner to re-
move any remaining beans)
•
Attach the portafilter (C1) and operate
the coffee mill a number of times with-
out beans to free the grinder. Attach the
portafilter to the outlet of the grinder
(A13). Push the portafilter to start
grinding: it stops automatically. Repeat
until the filter is empty
•
Place the new coffee in the beans
container
•
If the amount of coffee ground is not
enough to reach the perfect dose, pro-
ceed setting the appliance as for the
first use
See section "6. Cleaning the grinder".
Adjust the quantity of coffee with the dial
(B4). If the dial is already in the max. position,
select the second range of grinding adjust-
ment (see "3. Menù settings"- "Extra grinding
adjustment").
Make sure the 2X light is on
Address to a Customer Service Centre to
change burrs.