Wiring Power - Emerson FB2100 Quick Start Manual

Wiring Power

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-
hazardous. Performing this operation in a hazardous area could result in an explosion.
The flow computer accepts DC power with an input voltage range from 10.5 to 30V. The
amount of power required depends on installed options.
DC Power
1 To external DC power supply
Important
If your installation uses DC power for main power, do not wire battery power as a
secondary (back up) power source. Certification only allows a single main power
source; wiring both sources will void your certification.
DANGER
FB2100 Flow Computer Quick Start Guide
D301787X012
November 2023
19