Table of Contents
Advertisement
Provisioning
Clearing the History, Alarm, and Event Log Screens
Select Master Clear to clear the History, Alarm, and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the start-up session and ensures that you
have meaningful data thereafter.
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1
Press
P
to select the Performance screen.
2
Press the
SPACEBAR
NET HDSL, H4DU-1 CPE HDSL, H4DU-2 NET HDSL, H4DU-2 CPE HDSL, or H4TU-R HDSL),
ENTER
then press
3
Press
↓
to select statistics.
SPACEBAR
4
Press the
48-Hour History, or 31-Day History), and press
—
Selecting 31-Day History allows you to clear the current, 25-hour, 48-hour, and 31-day
performance history screens for the selected interface.
—
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL4 Alarm screens, see
page
33, respectively.
L
5
Press
to clear the screen.
Y
6
Press
to confirm.
To clear ALL history, alarm, and event log screens by this method:
1
Press
C
to select the Config screen.
2
Use the
and
↑
3
Press
ENTER
4
Press
Y
to clear all screens.
20
E
to select the Event Log screen, then press
to select either interface (H4TU-C DS1, H4TU-R DS1, H4TU-C HDSL, H4DU-1
.
to select the type of statistics (Current, Alarm History, 25-Hour History,
arrow keys to select Master Clear (see
↓
to activate.
October 15, 2003
L
to clear the screen.
ENTER
after your selection.
Table 11 on page 32
Figure
10).
LTPH-UM-1253-01
and
Table 12 on
H4TU-C-231 List 5A
Advertisement
Table of Contents
