Wolf DF48650G/S/P Use And Care Manual page 14

Oven Operation
Temperature Probe
Use only the temperature probe shipped with this appli-
ance. Refer to the illustration below. The temperature
probe measures the internal temperature of food while
cooking. The probe can be used to monitor the tempera-
ture without setting a desired temperature and can be used
with all cooking modes except Broil, Proof, and Dehydrate.
Setting controls:
Preheat the oven to the desired oven temperature in
1
the desired mode.
Completely insert the probe sensor into the thickest
2
area of the food.
3 When preheat is complete, place food in the oven.
Insert the probe into the probe receptacle. Refer to the
4
illustration below. Close the oven door.
Touch Probe.
5
6 Touch Set to select the preset temperature. To change
the temperature, use the slide bar to select the desired
temperature, then touch Set.
7 A chime indicates the temperature is 5°F
the set temperature. The oven chimes and the set
temperature flashes when the internal temperature
reaches the setpoint.
Remove, then reinsert the probe to verify the internal
8
temperature.
Touch the flashing temperature to clear.
9
Temperature probe
14 | Wolf Customer Care 800.222.7820
below
(1°C)
Probe receptacle
CAUTION
The probe and probe receptacle will be very hot.
Handle with care.