Nokia RM-579 Service Manual page 81

RM-578; RM-579
BB Troubleshooting and Manual Tuning Guide
iii Choose the product manually from File→Open Product , and click OK.
Wait for the phone type designator (e.g. "RM-381" ) to be displayed in the status bar.
iv Go to Flashing→Firmware update and wait until
following picture.
v To continue, click Refurbish.
Progress bars and messages on the screen show actions during phone programming, please wait.
Programming is completed when Flashing Completed message is displayed.
The product type designator and MCU SW version are displayed in the status bar.
SW Update window and then choose File→Close Product .
vi Close the
Request file.
2. Create a
For this procedure, you must supply +12 V to CU-4 from an external power supply.
i To connect the phone with
ii Choose Tools→Certificate Restore .
Issue 3
Phoenix , choose File→Scan Product .
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Phoenix reads the product data as shown in the
Page 3 –37