Table of Contents
Advertisement
4 From the Mode drop-down menu, set to Local.
5 Choose Testing → Self Tests.
6 In the Self Tests window check the following Bluetooth and FM transmitter tests:
• ST_LPRF_IF_TEST
• ST_LPRF_AUDIO_LINES_TEST
• ST_BT_WAKEUP_TEST
• ST_FMTX_TEST
7 To run the test, click Start.
FM Receiver Self Tests
The self test ST_FM_RADIO_TEST used on previous phone designs is not available. As Bluetooth and FM radio
share the same control interfaces, FM radio control interfaces are tested using the Bluetooth Self Tests.
Bluetooth BER Test
SB-6 Bluetooth test box (BT-box) is required to perform a BER (Bit Error Rate) test. If a BT-box if not available
Bluetooth functionality can be checked by transferring a file to another Bluetooth phone.
Steps:
1 Place the phone in the flash adapter or connect data cable to phone.
2 Start Phoenix service software.
3 Choose File → Scan Product.
4 Choose Testing → Bluetooth LOCALS
5 Locate the BT-box serial number (12 digits) found in the type label on the back of the SB-6 Bluetooth test
box.
6 In the Bluetooth LOCALS window, write the 12-digit serial number on the Counterpart BT Device Address
line.
7 Place the BT-box near (within 10 cm) of the phone and click Run BER Test.
Page 4 –22
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
RM-578; RM-579
RF troubleshooting
Issue 3
Advertisement
Chapters
Table of Contents
Troubleshooting
