Section 3 - Configuration
This section allows you to change several advanced settings for both 2.4G and 5G on your DHP-W610AV.
Transmit Power:
Sets the power of the antennas.
WLAN Partition:
Select this checkbox to enable WLAN partition. If this feature
is disabled, then there is no barrier between communication
among wireless stations connecting to the DHP-W610AV. If
this is enabled, wireless clients are not allowed to exchange
data with each other through the DHP-W610AV.
HT20/40
Enabling this function allows compatibility with both
Coexistence:
802.11ac/n devices as well as 802.11a/g by using both bands.
Disabling this may provide higher speeds by automatically
selecting one band but may only allow 802.11ac/n devices
to function.
Click Save Settings for the changes to take effect.
D-Link DHP-W611AV User Manual
Advanced Wireless
20