Table of Contents
Advertisement
Signal Conditioning Options
© National Instruments Corporation
To measure signals from these various transducers, you must convert them
into a form that a DAQ device can accept. For example, the output voltage
of most thermocouples is very small and susceptible to noise. Therefore,
you may need to amplify or filter the thermocouple output before digitizing
it. The manipulation of signals to prepare them for digitizing is called
signal conditioning.
For more information about sensors, refer to the following documents.
•
For general information about sensors, visit
•
If you are using LabVIEW, refer to the LabVIEW Help by selecting
Help»Search the LabVIEW Help in LabVIEW, and then navigate to
the Taking Measurements book on the Contents tab.
•
If you are using other application software, refer to Common Sensors
in the NI-DAQmx Help, which you can access from Start»All
Programs»National Instruments»NI-DAQ»NI-DAQmx Help, or
the LabVIEW 8.x Help.
SCXI
SCXI is a front-end signal conditioning and switching system for various
measurement devices, including E Series devices. An SCXI system
consists of a rugged chassis that houses shielded signal conditioning
modules that amplify, filter, isolate, and multiplex analog signals from
thermocouples or other transducers. SCXI is designed for large
measurement systems or systems requiring high-speed acquisition.
System features include:
•
Modular architecture—Choose your measurement technology
Expandability—Expand your system to 3,072 channels
•
•
Integration—Combine analog input, analog output, digital I/O, and
switching into a single, unified platform
•
High bandwidth—Acquire signals at an aggregate rate of up to
333 kHz
•
Connectivity—Select from SCXI modules with thermocouple
connectors or terminal blocks
1-5
Chapter 1
DAQ System Overview
ni.com/sensors
E Series User Manual
.
Advertisement
Table of Contents
