Recording Audio From A Connected Component; Recording On A Connected Component - Sony DHC-FLX9W Operating Instructions Manual

Recording audio from a
connected component
1
Connect the audio cords.
See "Hooking up optional components" on
page 65.
2
Start recording manually.
See "Recording to a tape" on page 51.
Recording on a connected
component
1
Connect the audio cords for analog
recording, or connect the digital optical
cable for digital recording.
2
On the remote, press EFFECT
repeatedly while pressing SHIFT to
select "EFFECT OFF".
3
On the remote, press 2.1CH/MULTI
repeatedly while pressing SHIFT to
select "2.1CH".
4
Start recording.
Refer to the operating instructions provided
with connected component.
Notes
• Digital signals are output from OPTICAL DIGITAL
OUT jack during DVD function only. Besides, the
sound output from the OPTICAL DIGITAL OUT
jack is not affected by the sound adjustment. Digital
signals from Super Audio CDs are not output from
OPTICAL DIGITAL OUT.
• This unit is not compatible with 96 kHz sampling
frequencies and Super Audio CD format.
• While recording, do not change the 2.1CH/MULTI
setting.
GB
67