Listening To The Radio - Sony DHC-FLX9W Operating Instructions Manual

Listening to the radio

You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner's memory first
(see "Presetting radio stations" on page 47).
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press . or > repeatedly to select
the desired preset station.
To select the desired preset
number using the numeric
buttons on the remote
Press numeric buttons instead of performing
step 2.
To enter preset number 10 or higher, press >10
and the corresponding numeric buttons. To enter
0, press 10/0.
Example:
To enter preset number 20, press >10, then 2 and 10/0.
Listening to non-preset radio
station
— Manual Tuning
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press m or M repeatedly to tune in
the desired station.
Note
When switching to DVD function from tuner, a longer
time may be required to access the disc. In this case, set
"DVD POWER ON" by DVD power manage function
(page 48).
Tips
• To improve broadcast reception, reorient the
antennas.
• When an FM stereo programme has static noise,
press REPEAT/FM MODE on the remote repeatedly
until "MONO" appears. There will be no stereo
effect, but the reception will improve.
• Press and hold m or M in step 2 above. The
frequency indication changes and scanning stops
when the system tunes in a station (Automatic
Tuning).
GB
49