Extended Network; Wireless Mac Filtering - TP-Link TL-WR840N User Manual

Chapter 7
5. Click Save.
7 4 2

Extended Network

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless >
router (Range Extender)'s wireless network.
3. If you want to share the same SSID of the host router, click
Save.
7 4 3

Wireless MAC Filtering

Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
How can I
do that?
Extended Network, you can view the SSID and password of the
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the router, but
other wireless clients cannot access the router
1 Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
Configure the Router in Range Extender Mode
Copy Host SSID and click
149