Table of Contents
Advertisement
Updating the software
You can update the Home Connect
software on your appliance.Whenever a
new update is available, —˜š (update)
will appear on the display.
You can install the update directly via
the message on the display or,
alternatively, via the appliance settings.
Switch on the appliance.
1.
Press and hold Remote Start } for
2.
at least 3 seconds.
'ž£ (connect automatically) will
appear on the display.
Turn the programme selector to
3.
position 6.
—˜š (update) will appear on the
display.
Start/Pause Ü will flash if a software
update is available.
Press Start/Pause Ü.
4.
¢"à (yes) will appear on the display.
Press Start/Pause Ü to confirm.
5.
Update installation will now start. This
process may take several minutes. Do
not switch the appliance off while
updates are being installed.
Press Remote Start } briefly to exit
6.
the Home Connect settings.
Information on data protection
When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of your household appliance.
Status of any previous resetting to
■
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Ensure that the Home Connect
Note:
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Home Connect
en
37
Advertisement
Table of Contents
