Table of Contents
Advertisement
Place the condensation hose in the
4.
"parked" position.
Take the drain hose from the
5.
accessories and attach it to the free
socket, pushing it up to the stop.
Secure the other end of the drain
6.
hose in place using the remaining
accessories (depending on the
connection type).
Wash basin:
Replacing the condensation drain
Siphon:
The connection point must be
secured using a hose clamp
(clamping range 12-22 mm).
Floor drain:
Caution!
Risk of material damage due to
leaks or draining water.
Secure the drain hose to prevent it
from slipping out. Do not kink the
drain hose. The difference in height
between the installation surface and
the drain should not exceed 100 cm.
Caution!
Risk of accumulated water being
drawn back into the appliance and
causing material damage.
Check that the water drains away
quickly. The drain must not be
sealed or blocked.
en
39
Advertisement
Table of Contents
