Connecting To Your Home Network Automatically; Connecting To Your Home Network Manually - Bosch WT4HW569DN Installation And Operating Instructions Manual

You cannot use the
■
Home Connect app to make
changes while the appliance
controls are being operated. You will
be able to use the
Home Connect app to see any
adjustments made directly on the
appliance itself, however.
Connecting to your home
network automatically
If your router has a WPS function, you
can connect the appliance to your home
network automatically.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
Switch on the appliance.
1.
Press and hold Remote Start } for
2.
at least 3 seconds.
'ž£ (connect automatically) will
appear on the display.
Press Start/Pause Ü to connect to
3.
the network. | will flash on the
display.
The appliance will now try to connect to
your home network.
Activate the WPS function on your
4.
home network router within the next
2 minutes.
If the appliance has connected to your
home network successfully, '©Ÿ
(connected) will appear on the display
and | will be lit continuously.
Press Remote Start } briefly to exit
5.
the Home Connect settings.
If a connection could not be
Note:
established, "§§ (fault) will appear on
the display. Check whether your
appliance is in range of your home
network.Try connecting automatically
again or connect your appliance
manually.
Connecting to your home
network manually
If your appliance has already been
automatically connected to your home
network, you can skip the manual
connection step.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
Switch on the appliance.
1.
Press and hold Remote Start } for
2.
at least 3 seconds.
'ž£ (connect automatically) will
appear on the display.
Home Connect
en
33