Toshiba e-STUDIO 203S Operator's Manual page 60

USER SETTINGS
Print mode
Program
number
1
2
3
1
* The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED",
however, the printing speed does not increase considerably.
2
* When the 250-sheet paper feed unit is installed.
58
Program name
FORCED
OUTPUT
USB 2.0 MODE
1
SWITCH*
AUTO TRAY
2
SWITCH*
Get other manuals https://www.bkmanuals.com
Setting codes
(factory default
setting appears
in bold)
• When this function is enabled,
1: ON
2: OFF
• This sets the USB 2.0 data
1: FULL-SPEED
2: HI-SPEED
• If the paper runs out during
1: ON
2: OFF
Explanation
printing in printer mode will
automatically continue using a
different size of paper if the
specified size of paper runs
out in all trays. This feature
does not function in copy
mode.
transfer speed. To obtain the
fastest speed when using the
USB 2.0 connector, first verify
that your computer meets the
system requirements
(operating system and driver),
and then use this program to
change the USB 2.0 mode to
"Hi-Speed". Note that the
setting should not be changed
while running a TWAIN driver.
(For the system requirements,
see "System requirements for
USB 2.0 (Hi-Speed mode)"
(p.49).)
printing and there is paper of
the same size in another tray,
this function automatically
switches to that tray
(excluding the bypass tray).
The function can be disabled.