Nikon R1 Instruction Manual page 35

Setting a channel number on the SU-800 and
7
SB-R200.
CHANNEL
3
2
1
1
Set a channel number on the
SU-800.
Press the [SEL](FUNC.) button to display
channel number (blinking). Press the []
or [] button to change the channel
number. Press the [SEL](FUNC.) button
again and the channel number will stop
blinking. The last channel number to blink
is the one that has been set automatically.
• Select one of the four available channels.
• The channel number blinks during adjustment
2
Set a channel number on the
SB-R200.
4
Rotate the [CHANNEL] select dial on the
SB-R200 to set the same channel number
as set on the SU-800.
and stops after blinking six times unless an
adjustment is made. The last channel number
to blink is the one that has been set
automatically.
35