Nikon R1 Instruction Manual page 114

2
Procedures for close-up flash operation (using cords)
Checking the illumination before actually taking pictures
(Modeling Illumination) in close-up flash operation (using
cords)
SEL
READY
LOCK
Using the Target Light (Focus-assist Illuminator) in
close-up flash operation (using cords)
SEL
READY
LOCK
114
Press the Target Light button on the SU-800 and
release within one second and the SB-R200's flash
fires repeatedly at a reduced flash output level. This is
useful for checking the illumination and the shadows
cast on the subject before actually taking the picture.
Press the Target Light button on the SU-800 for more
than one second, the Target Light on the SB-R200
lights up.
• The Target Light illuminates for 60 seconds and goes out
automatically. To cancel the illumination within 60 seconds,
press the Target Light button again for more than one
second.
• The Target Light also goes out when:
Releasing the shutter
Test firing
Firing the Modeling Illuminator
Pressing the [ON/OFF] button
• Pressing the Target light button on the SB-R200 is invalid.