Nikon R1 Instruction Manual page 23

 Wireless Remote Speedlight SB-R200
8
7
5
1 [CHANNEL] select dial
Sets the communication channel through which
the Commander and SB-R200 units exchange
data (p. 35).
2 [GROUP] select dial
Sets the group of the SB-R200 (p. 36).
3 Target Light (Focus-Assist
Illuminator)
4 Flash head
5 Release button
Hold down and slowly move the SB-R200 until
it comes to the desired position, then release
the button to secure (p. 31).
6 Mounting Foot (p. 31)
7 Target Light Button
Sets the target light to turn on or off (p. 90).
8 [ON/OFF] button
Press to turn the power on or off.
To avoid accidental firing or a malfunction when
carrying the SB-R200 in your camera bag, turn
off the flash unit.
9 TTL cord terminal
Connects the SU-800 to the SB-R200 via a cord
when used with cameras that are not compatible
with CLS (p. 110).
9 10
11
1
2
3
4
5
6
10 Terminal cover
Close the cover when not using the TTL cord.
11 Ready-light
The lamp lights up in green when the power is
on. It turns red when the SB-R200 is fully
recycled and ready to fire.
The green lamp blinks when battery power is
weak.
12 Battery chamber lid (p. 30)
13 Light sensor window for wireless
remote flash
14 Lock switch
Secures the SB-R200 to the Attachment Ring
(p. 31).
12
13
14
23