Load Film - Nikon N80 Instruction Manual

3
3.1
3.2
20
Load Film
Turn the power switch on and
load DX-coded film. With DX-
coded film, film speed will be set
automatically (ISO 25-5000).
When the camera is turned on,
film is loaded and the camera
back is closed, the film
automatically advances to the
first frame.
OX-coded film
~ ISO
~ ~
(film speed)
"" 1), 36
, DX mark
Turn the power switch on, confirm that the film
speed setting is set to 100, then open the camera
back by sliding the camera back lock release lever.
125 FS.6
G
. ~
...
tml.
Gl(
El
• If the film speed setting is not set to liD , see page 36.
Insert film from the bottom side and pull film leader
out to red index mark .
• Do not insert the film leader beyond the red index mark.
NOTE: Loading/removing film
Shutter curtains are very thin. Do not
touch the shutter curtains with your finger
or the film leader.