Nikon N80 Instruction Manual page 62

62
Auto Exposure Bracketing-continued
• Rotating the Sub-Command Dial while pressing the Auto Exposure
Bracketing button
Cl!:il
changes the setting as follows :
Number of shots and
Bracketing bar graphs Bracketing order
compensated EV value
3F 0.5 +41.-
0, -D.5, +0.5
3F
,n
+4"-
0, -1.0, +1 .0
I . U
3F
:.5
+41.-
0, -1 .5, +1.5
3F
c.O
+41.-
0, -2 .0, +2 .0
+2F 0.5
+41
0, +0.5
+2F
,n
+41
0, +1.0
I.U
+2F
1.5
+41
0, +1.5
+2F 2D
+41
0, +2.0
--2F 0.5
..
-
0, -0.5
--2F
,n
1.-
0, -1 .0
I.U
--2F
:.5
..
-
0, -1 .5
--2F 2.0
1.-
0, -2.0
~
3: Bracketing order can be set to change from negative EV value to
positive EV value (page 71).
3
Compose picture, focus and shoot.
• Compensated shutter speed and aperture values are displayed during
shooting.
• To cancel the Bracketing, rotate the Main-Command Dial while pressing the
Cl!:il
button so Iil:tJ disappears from the LCD panel or perform Two-Button
Reset (page 76). The number of shots and compensated EV values
previously selected will remain when they are canceled with the Main-
Command Dial, and they automatically reset to
" 3F 0.5"
when the Two-
Button Reset is performed.
• If the exposure compensation function (page 60) or flash exposure
compensation (page 85) is 'also set, Bracketing will be combined with the
exposure compensation values. It is useful to perform Bracketing with a
compensated value of over +2 EV or under -2 EIJ.
• With film advance mode in
~
(continuous shooting), fully depress and hold
the shutter release button until the set number of shots has been taken and
film advance stops automatically.
• If the end of the film roll is reached during Bracketing, the remaining shots
can be taken after new film has been loaded. Also, if you turn the power
switch off during Bracketing, the remaining shots can be taken after the
power is turned back on .
• Bracketing is performed with one frame at a time when the self-timer (page
68) is set.