Fisher-Price POWER WHEELS VOLKSWAGEN NEW BEETLE Owner's Manual With Assembly Instructions page 17

23
• Fit a .437 white cap nut onto the end of a front axle.
• Tap the cap nut with a hammer to secure it to the end of the
front axle.
• Repeat this procedure to fasten another .437 cap nut to the
other front axle.
24
Steering Linkage
Assembly
(Smooth Side Up)
Bottom View
• Turn the steering assembly
over, with the smooth
side up.
• Fit the steering linkage
assembly to the front end
of the vehicle body.
IMPORTANT! Make sure the
notch on the steering linkage assembly aligns with the notch
in the front end of the vehicle body.
Assembly
Cap
Nut
Front
Axle
See
Inset
Notch
Notch
17
Get other manuals https://www.bkmanuals.com
25
Deep
Holes
• Insert two 1 / " x 1 1 / " screws through the deep holes in the
4 2
steering linkage assembly and into the vehicle body.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Pull up on the steering linkage assembly to be sure it is
secure. If it is not secure, tighten the screw with a few
more turns.
26
Bottom View
• Fit a large washer onto a front axle.
Steering
Linkage
Bottom View
Front Axle
Large
Washer