Table of Contents
Advertisement
User's Manual
INSTALLATION INSTRUCTIONS
INSTALLATION:
1. Put the monitor on the flat or soft place.
2. Remove the screws on the bracket.
3. Align the monitor with the opening in the base.
4. Align the screw to the hole position on the base and lock it clockwise.
5. Verify that the monitor is securely attached to the base by looking at the bottom of the base and
making sure that the clips are fully engaged in the base.
REMOVAL:
1. Flip over the monitor so that it is upside down.
2. Remove the screws counterclockwise and separate the base.
3. Gently pull the base from the monitor until they are unattached.
POWER
POWER SOURCE:
1. Plug one end of the 12V DC adapter to the LCD monitor's DC 12V input socket, plug one end of
the AC power cord to the 12V DC adapter AC input socket, and the other end of the AC power
cord to Wall outlet.
2. Connect the DC-power adaptor one end to your LCD monitor's DC-input port, the other end to
wall-outlet.
Figure.1. Installing and Removing the Base
8
Advertisement
Table of Contents
