Table of Contents
Advertisement
A-7
SAFETY PRECAUTIONS
Read this entire installation section before you
start installation.
WARNING
ELECTRIC SHOCK can kill.
• Only qualified personnel should per-
form this installation.
• Turn the input power OFF at the dis-
connect switch or fuse box before
working on this equipment. Turn off
the input power to any other equip-
ment connected to the welding sys-
tem at the disconnect switch or fuse
box before working on the equip-
ment.
• Do not touch electrically hot parts.
------------------------------------------------------------------------
NON-STANDARD SAFETY INFORMATION
CAUTION
The MAXsa™ series of wire drives may be at
welding voltage potential when the output of the
power source is active.
------------------------------------------------------------------------
INPUT AND GROUND CONNECTIONS
Only a qualified electrician should connect the
MAXsa™ 22 & 29 WIRE DRIVES. Wire Drive
Installation should be made in accordance with the
appropriate National Electrical Code, all local codes
and the information in this manual.
LOCATION AND MOUNTING
The MAXsa™ Wire Drive will operate in harsh indoor
environments. It has an IP2X rating.
HIGH FREQUENCY PROTECTION
Locate the MAXsa™ Wire Driveaway from radio con-
trolled machinery.
INSTALLATION
MAXsa™ 22 & 29 WIRE DRIVES
A-7
Advertisement
Table of Contents
