Table of Contents
Advertisement
•
CD players
Using the Guided Frequency Setup
Set up a new system:
1.
Push the control knob on the receiver and select 1. Frequency Setup > 1.1 Guided Frequency Setup.
2.
Select Initialize My System and push the control knob to continue.
3.
Turn off all transmitters you plan to use with your system.
4.
Select start scan.
5.
After the scan is done, push the control knob to assign frequencies to the receiver.
6.
Turn on the transmitter you plan to use with this receiver.
7.
Align the infrared (IR) ports on the transmitter and receiver, and push the sync button.
8.
Once the sync is complete, the system is ready for use.
Add a new receiver to your system:
Shure Incorporated
21/43
Advertisement
Table of Contents
