Shure SLX D Series Manual page 12

Main Menu
Push the control knob button to access the menu, and rotate to advance to the next menu screen.
1. Frequency Setup
2. Channel Name
3. Gain
4. Mic/Line Level
5. Advanced Settings
1.1 Guided Fre- Step­by­step instructions to initialize a new system, or to add a re­
quency Setup ceiver to an existing system
Receiver automatically scans for the best available group, if applic­
able.
1.2 Group Scan
Note: Some bands consist of only a single group. RF performance is the same in
single-group bands as in bands that support multiple groups.
Receiver automatically scans for available channels within the se­
1.3 Channel Scan
lected group
1.4 Manual Fre-
Manually tune the receiver to a desired frequency
quency Setup
Customize the channel name
Monitor audio levels and adjust the receiver gain
Switch between output levels
•
•
5.1 Device Lock
•
5.2 Network Con-
Switch between automatic and manual IP addressing
figuration
5.3 Controller Ac-
Block or allow third-party control access
cess
5.4 Transmitter
Apply and sync transmitter presets
Preset
5.5 Device Preset Save current receiver settings or restore last saved settings
5.6 Factory Reset Restores all settings to factory defaults following a system reboot
5.7 Transmitter
Update transmitter firmware using IR sync
Firmware
Unlock: Receiver is unlocked
Lock Menu: Receiver settings are locked
Lock Menu & Power: Receiver settings and power button are
locked
Shure Incorporated
12/43