Cleaning; Weekly; Monthly; Semi-Annually (More Often If Conditions Dictate) - Follett Maestro Plus MC 414A Series Installation, Operation And Service Manual

Table of Contents

Advertisement

Cleaning

Follett ice machines and dispensers, and their associated cleaning and sanitizing procedures, are designed for
use with potable water sources. The presence, or suspected presence, of infectious agents may call for additional
measures, including the replacement of components and more comprehensive disinfection measures. Follett
recommends that these cleaning and sanitizing procedures be reviewed with the appropriate infectious agent subject
matter experts to assure complete remediation.
Periodic cleaning of Follett's ice machine system is required to ensure peak performance and delivery of clean,
sanitary ice. The recommended cleaning procedures that follow should be performed at least as frequently as
recommended and more often if environmental conditions dictate.
Cleaning of the condenser can usually be performed by facility personnel. Cleaning of the ice machine system
should be performed by your facility's trained maintenance staff or a Follett authorized service agent. Regardless of
who performs the cleaning, it is the operator's responsibility to see that this cleaning is performed according to the
schedule below. Service problems resulting from lack of preventive maintenance will not be covered under the Follett
warranty.
Recommended cleaning intervals*
Maestro Plus
Drain Line
Drain Pan/Drip Pan
Exterior, Water Station Tube
Condenser
Ice Machine
Transport Tube
* Ice machine must be cleaned prior to start-up.

Weekly

The exterior may be cleaned with a stainless cleaner such as 3M™ Stainless Steel Cleaner & Polish or equivalent.

Monthly

Condenser (air-cooled ice machine only)
1. Use a vacuum cleaner or stiff brush to carefully clean condenser coils of lint and debris to ensure optimal
performance.
2. When reinstalling counter panels in front of RIDE
up with condenser air duct.

Semi-Annually (more often if conditions dictate)

§ A cleaning procedure should always include both the ice machine and bin/dispenser.
§ Icemaking system can be cleaned in place.
Cleaning Tool Checklist
§ (1) 1.5 gallon (or larger) plastic bucket
§ (2) clean cloths
§ Sanitary gloves
§ Safety glasses
§ SafeCLEAN™ Plus ice machine cleaner
§ (2) SaniSponge™ (PN 00131524 - single sponge)
Frequency
weekly
weekly
as needed
monthly (air-cooled only)
semi-annually
semi-annually
®
model ice machines, be sure that ventilation louvers line
MC_414A, MF_414A R290 230 V/50 Hz Ice Machines
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maestro plus mf 414a series

Table of Contents