Cambridge Audio C10974 Manual page 8

8
Care should be taken to ensure no stray strands of wire short the speaker outputs together. Please ensure that the loudspeaker terminals have
been tightened completely to provide a good electrical connection.
It is possible for the sound quality to be affected if the screw terminals are loose.
4. LOOP OUT - This output can be used for bi-amping, daisy chaining or connecting to the input of an active subwoofer.
The XLR output is balanced and the RCA output is unbalanced.
5. BALANCED/UNBALANCED SWITCH - Select depending on whether a source is connected to the balanced XLR or unbalanced RCA input.
Note: There will be no sound from the amp if the correct input isn't selected. If a source is connected to the balanced input, for example, ensure
that the balanced switch has been selected.
6. BALANCED/UNBALANCED INPUTS - The XLR input is balanced and the RCA input is unbalanced.
7. AUTO POWER DOWN (APD) SWITCH - Switches to enable or disable the Auto Power Down function. When enabled, the amplifier will
automatically switch to standby mode after inactivity of 20 minutes.
8. LINK - Refer to the 'Power syncing' section of this manual for more information.