Cambridge Audio C10974 Manual page 11

11
Using XLR cables will enable a balanced analogue connection to your EDGE W. This will provide a cleaner signal path compared to an RCA
unbalanced connection, especially over longer cable lengths, however the increase in audio quality they provide is subjective when used over
shorter lengths.
If using XLR cables, ensure the 'Balanced' switch on your EDGE W is selected.
ANALOGUE OUTPUTS
The output connections remain active at all times which means there are a few uses for these connections that can enable you to get even more
from your system.
Any component or device connected to the EDGE W's outputs will follow the volume commands of the preamplifier, to ensure the volume
increases/decreases in sync.
Subwoofer:
Although the EDGE W does not contain a dedicated subwoofer output, a subwoofer can be connected from either of the unbalanced RCA Pre-
Outputs to the corresponding inputs on the rear of your powered sub.