Using Input Signal Plus; Using Hdmi Black Level - Samsung QNSSQ60R User Manual

FreeSync
●
You can make your gaming experience more pleasant by eliminating screen tearing and stuttering.
Be sure to set this function only for the external devices that support the AMD Radeon FreeSync feature.
–
For an optimized game environment, set the resolution of the external device to 1080p at 120 Hz. For more
–
information, refer to "Supported Resolutions for FreeSync."
"
If the resolution is not supported, the operation may not be smooth.
"
When the FreeSync options are set or the FreeSync function is operating for an external device, the screen may flicker.
" Slight brightness changes may occur during FreeSync operation due to frequency variation of the external device.
" Before playing a game, set

Using Input Signal Plus

Settings
Expands the input signal range for HDMI connections.
" When you select the HDMI connector you want to use for
Input Signal Plus function to On, the TV screen may flicker.
" When you connect the TV to an external device that supports only the UHD 24 or 30 Hz frequencies or any FHD frequency,
the Input Signal Plus
" For more information about the supported UHD resolutions, refer to "Supported Resolutions for UHD Input Signals."
"
For more information about the Q900RB model series, refer to "Resolutions for Input Signals supported by Q900RB model
series."

Using HDMI black level

Settings
Use HDMI Black Level to adjust the black level to compensate for low black levels, low contrast, or dull colors
generated by external devices connected to the TV via an HDMI cable.
" This function is only available when the input signal connected to the TV via an HDMI connector is set to RGB444.
FreeSync to Basic
General External Device Manager
function may not be available. In this case, turn off the
General External Device Manager
or Ultimate.
Input Signal Plus
Input Signal Plus, and then press the Select button to set the
Input Signal Plus
HDMI Black Level
- 96 -
Try Now
function.
Try Now