Operation Instructions - Rinnai RRTB62S-G-LP User Instructions

Hide thumbs

Table of Contents

Ignition of Burner

Ensure the control knob is at the off position

direction to maximum flame position. Sparks are maintained for around 10 seconds for ignition.

After releasing the knob, make sure the flame persists.

Attention: If the appliance has not been used for a long time, the first ignition may not succeed

due to trapped air in gas pipe. Turn the control knob to the off position

above ignition procedures until success of ignition.

Flame Control

After ignition, turn the control knob to adjust flame power.

After ignition, turn the rotary knob to adjust flame power according to cooking needs. Please adjust

slowly.

Large Burner

When adjust flame power from maximum close to medium, if flame of outer ring burner is found

unstable (weak or extinguished), please adjust the flame power to maximum until flame of outer ring

burner is stable, or reduce flame power and use flame of simmer burner.

Knob Position

Large Burner

Medium

Flame Condition

Rotary

MAX

Outer Burner Flame

knob

Simmer Burner Flame

position

Rotary knob

position

Turning off Flame

Turn the control knob to the off position "

Attention: Pop sound may be generated when turning off flame due to the instant combustion of

gas remained in burner. This is a normal phenomenon.