Using The Quick Recycling Battery Pack Sd-800 - Nikon SB-800 Instruction Manual

Using the Quick Recycling Battery Pack SD-800

Use the provided quick recycling battery pack to install five batteries to shorten
the recycling time (p. 19).
WARNING
Battery chamber lid
Quick recycling battery
pack lock switch
• The battery chamber lids for the SB-800 and SD-800 are identical.
■■■
Attaching the Quick Recycling Battery Pack SD-800
64
Notes on using the Quick Recycling Battery Pack SD-800
• With the SD-800 attached, be sure to use five batteries.
• Be sure to replace all five batteries, including the one in this pack and
the four inside the SB-800, with fresh ones at the same time.
• Do not mix battery brands or types, or use old with new batteries.
Otherwise, the batteries may leak corrosive liquids, become hot, or
explode.
• This battery pack cannot be used when the Power Bracket Unit
SK-6/SK-6A is attached to the SB-800.
1
Slide the SB-800's battery chamber lid in the
direction of the arrow to open.
2
Push the battery chamber lid back in the direction
of the arrow to remove it.
• The lid can be easily removed if pushed back past
the perpendicular position.
Battery chamber lid
attachment index