Table of Contents
Advertisement
- A C C E S S O R I E S - - - - - - - - - - - - -
TTL Remote Cords SC-12 and SC-23
The SC-12 is for the Nikon
F3-series
cameras; the SC-23
is for the Nikon FA, FE2
,
F-30l1N2000 and FG cameras.
Connecting the SB-l
l
and an appropriate camera
with
SC-12 or SC-23 provides
TTL control
of the flash expo-
sure.
Automatic switchover of shutter speed to a p roper
flash sync speed and a ready-light indication in the
camera's viewfinder are also provided.
Sensor Remote Cord SC-13
The SC -13 is used to mount the SB-ll's Sensor Unit SU-2
directly on a camera's ISO-type accessory shoe for auto-
matic (but not TTL), off-camera
operation.
With the FA,
FE2, FE, FM2, F-301lN2000, FG, FG-20, or EM camera,
or with the F3-series camera via the AS-4 coupler, a
ready-light indication is prOVided in the camera's view-
finder
.
Except for the FM2, the automatic
switchover
of
shutter speed to a proper
flash
sync speed is also
pro-
vided
.
Sync Cord SC-15
A coiled cord over one meter in length, the SC- 15 screws
into the
camera's
sync
terminal
and allows the SB-ll to
be detached from its bracket and used off-camera.
DC Unit SD-7
The Nikon DC Unit SD-7 is an external power source
which can be used with the Nikon Speedlights SB-ll and
SB-14. This unit uses six C-type batteries of either the
22
alkaline-manganese or general NiCd type. Alkaline-
manganese batteries will produce approximately 270
flashes with the SB-l
l
and SB-14
on
Manual (in normal
temperatures). Minimum recycling time with NiCd bat-
teries is approximately 4 seconds with the SB-ll and SB-
14.
5C-23
~
::
::)
5C-1S
5C-13
5D-7
Advertisement
Table of Contents
