11.
12.
18
IBM 1 U Rack Mount Tape Enclosure: Installation Guide
Attach the external cables to the enclosure:
a.
Attach the signal cable to the host; then, connect the other end of the
signal cable to the connector on the rear of the enclosure.
b.
Connect the power cord to the enclosure; then, connect the power cord
to a properly grounded electrical outlet.
Note: The signal cable can be a SCSI, SAS, SATA, or USB cable.
Power cord
Host
See the documentation that comes with the drive for information about
setting up and using the drive.
Signal cable