Yamaha Star XV19CTSZ 2009 Owner's Manual page 77

1. Headlight bulb holder cover
2. Disconnect the headlight coupler,
and then unhook the headlight
bulb holder.
1. Headlight coupler
2. Headlight bulb holder
3. Remove the burnt-out bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Connect the coupler, and then in-
stall the headlight bulb holder cov-
er by turning it clockwise.
To replace the low beam headlight bulb
1. Disconnect the headlight coupler,
and then remove the burnt-out
bulb by turning it counterclock-
wise.
1. Headlight coupler
2. Headlight bulb
2. Install a new bulb by turning it
clockwise.
3. Connect the headlight coupler.
7-29
Installing the headlight unit
1. Install the headlight unit by install-
ing the screws.
2. Connect the coupler to the head-
light body cover.
3. Install the headlight body cover by
installing the bolts.
4. Install the windshield.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
7